One For All URC-8910 Bedienungsanleitung Seite 37
- Seite / 77
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
RESTORING FACTORY DEFAULT SETTINGS
The URC-8910 remote control includes an Operation Reset program
that you can use to restore the unit to factory default settings.
IMPORTANT: Executing this program will erase all custom settings,
including Home Theater assignments, Macros, Learned Keys, Keymoved
Keys, and all device assignments.
1. On the URC-8910 remote control, press and hold
SET until you see the display change from the cur-
rent device and time to [CODE SET].
NOTE: The device, its code, and time are examples.Your
remote control settings may be different.
NOTE: To exit programming at any time, press EXIT once or
allow 30 seconds of inactivity to lapse.You will see [EXIT
SETUP] as the remote control returns to normal operation.
NOTE: [INVALID] means you have inadvertently pressed an
incorrect key. Note your error and continue programming.
2. (x 2) Press the ▲ key twice until you see the display
change to [OPS RESET].
NOTE: If you go past [OPS RESET],press the
▼
key one or
more times to return to it.
3. Press SELECT once to begin programming.You will
see the display change to [CLR SETUP].
4. Press SELECT once to start the process.You will see
the display change to [RESET RAM] as the active
memory is cleared, followed by [RESET E2] as the
preprogrammed memory is restored.
Then you will see [EXIT SETUP] as the URC-8910
remote control automatically exits the programming
mode and returns to normal operation.
37
Producer 2002 IR Mnl 4/4/02 10:02 AM Page 50
- User’s Guide 1
- TABLE OF CONTENTS 2
- INTRODUCTION 3
- INSTALLING BATTERIES 4
- SETTING THE CLOCK 5
- FEATURES AND FUNCTIONS 6
- Key Charts 7
- PROGRAMMING DEVICE CONTROL 10
- (Play) key 11
- SEARCHING FOR YOUR CODE 14
- USING LEARNING 16
- USING VOLUME LOCK 19
- Programming Volume Unlock 20
- USING MACROS 21
- Channel Selection 22
- RE-ASSIGNING DEVICE KEYS 24
- USING KEYMOVER 25
- USING CHANNEL SCAN 28
- (continued) 29
- USING THE HOME THEATER MODE 30
- ▲ or ▼ keys to 34
- USING COMMERCIAL SKIP 35
- Operating Commercial Skip 36
- ABOUT UPGRADING 38
- SPECIFICATIONS 38
- TROUBLESHOOTING 39
- ERROR MESSAGES 40
- KEY INDEX 41
- Audio Cassette Deck Functions 42
- Audio Receiver Functions 44
- KEY INDEX (Continued) 47
- KEY INDEX (continued) 49
- DVD Player Functions 50
- Home Automation Functions 52
- Satellite Receiver Functions 54
- TV Functions 56
- VCR Functions 58
- LIMITED WARRANTY 60
- CUSTOMER SUPPORT 61
- ADDITIONAL INFORMATION 61
- MANUFACTURER’S CODES 62
- Setup Codes For CD Players: 64
- Setup Codes For DVD Players: 65
- Setup Codes For TVs: 67
- Setup Codes For VCRs: 72
Verwandte Produkte und Handbücher für Fernbedienungen One For All URC-8910
(3 Seiten)
(152 Seiten)
Mellerware 35100 manuali
Manuali dei proprietari e guide per l'utente per Ventilatori Mellerware 35100.
We fornisce 1 manuali pdf Mellerware 35100 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Kommentare zu diesen Handbüchern